Article No. 105020

    SP Top SL

    Colour: Schimmel-Sanierputz | 1050
    Packaging unit

    Product specifications

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on walls indoors and ceilings
    • AW_M_568
    • AW_M_648
    • Improving the energy performance of exterior walls

    Properties

    • EG_iQ_3
    • EG_iQ_11
    • Thermally insulating
    • EG_M_264
    • High sulphate resistance and low active alkali content (SR/NA)
    • Preparation
      • Substrate requirements

        Clean, dust-free and capable of supporting a load.

      • Preparations

        Pre-wet the substrate so that it is slightly moist.

        Apply SP Prep (Preparatory Mortar) in nodules as a fully opaque bonding layer.

    • Application
      • Mortar cover / Filling knife / Trowel application / Application by spraying
      • Application temperature: min. 5 °C max. 30 °C
      • Apply product using a suitable tool or machine.

        Level off surface with a long float.

        Finish the surface once set.

        VA1_M_107

        VA1_M_623

         

        One-layer

        VA1_M_559

         

        Two-layer

        VA1_M_624

        VA1_M_625

        VA1_M_648

        Roughen the first layer with a render comb.

    • Application instructions
      • Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.

        On critical substrates (highly uneven and/or fissured) we recommend incorporating the reinforcement fabric in the upper third of the restoration render.

        Apply additional diagonal reinforcement to the edges of building openings.

        Protect wet mortar surfaces against frost, rain and drying out too quickly for at least 4 days.

        Hairline/shrinkage cracks are safe and are not cause for complaint as they do not impair the properties of the mortar.

        To ensure that the renovation is successful, the relevant drying conditions according to WTA Code of Practice 2-9-04/D must be met.

    • Working tools / cleaning
      • Mortar cover / Filling knife / Trowel application / Application by spraying
      • Clean tools with water while the material is still fresh.

    • Storage / shelf life
      • Protect form moisture
      • Shelf-life 12 months
      • If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

    • General information
      • The mixing water must be of drinking water quality.

        May contain traces of pyrite (iron sulphide).

        Do not use on gypsum-based substrates.

        Low chromate content in accordance with Directive 2003/53/EC.

        The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products