• Default Package Display_GB

    Article No. 206620

    Wood Preservative Primer

    Solvent-based wood preservative impregnation with preventive action against blue stain and soft rot

    Colour: Wood Preservative Primer | 2066

    Product specifications

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use outdoors
    • for dimensionally stable elements
    • for elements with limited dimensional stability
    • for not dimensionally stable elements
    • For use on exterior wood
    • Dimensionally stable wood building elements (when used as a primer only): e.g. windows and doors
    • Wood building elements with limited dimensional stability, e.g. folding shutters, matchboarding, summerhouses
    • Wood building elements with no dimensional stability: e.g. fences, framework, carports, planking
    • Wood which is not in ground contact, in accordance with DIN EN 335-1, use classes 2 and 3
    • Pre-treatment under translucent or opaque coatings

    Properties

    • Solvent-based
    • EG_SpZ_14
    • Resistant to swelling, regulates moisture
    • Contains low-odour solvents
    • Good adhesion for subsequent coatings
    • Preparation
      • Substrate requirements

        Dimensionally stable wood building elements: wood moisture content 11-15%

        Wood building elements with limited or no dimensional stability: wood moisture content max. 18%

        The substrate must be clean, dust-free and dry.

      • Preparations

        Thoroughly remove any dirt, grease and non-adhering old coatings.

        Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        Observe BFS Code of Practice No. 18 "Coatings on Wood and Wooden Working Materials in Outdoor Areas".

    • Application
      • Brush
      • Stir before use
      • Application temperature: min. 5 °C max. 25 °C
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C

      • Stir well.

        Apply by brush.

        Apply in the direction of the grain.

        More detailed instructions can be found on the current Technical Data Sheet at www.remmers.com.

    • Application instructions
      • Drying time: can be worked over after 24 h
      • Rainfall may cause water soluble substances to bleed from wood that is rich in such substances, e.g. oak, red cedar, afzelia, redwood, etc. This may lead to the discolouration of light-coloured masonry or render.

        VA2_HL_22

      • Drying

        After approx. 24 hours at 20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Ready for use

    • Working tools / cleaning
      • Brush
      • Natural bristle brush, surface brush

      • Clean tools immediately after use with thinner and brush cleaner.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Store in well-sealed, original containers, out of the reach of children and in a dry, cool, well-ventilated room which is protected from direct sunlight and frost. No smoking is permitted in storage areas.

    • Usage
      • Preventive action against blue stain and soft rot at 140-160 ml/m² Practical experience has shown that at least two coats are required to achieve this application quantity.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

        European waste code 03 02 02* organochlorinated wood preservatives

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.