• Default Package Display_GB

    Article No. 26033025

    PUR Deco Color Bright

    2 Component, solvent free, self levelling polyurethane with good UV stability

    260330 | PUR Deco Color Bright
    Size / Quantity

    Brochures and Catalogues


    Product specifications

    Density (20°C) 1500 kg/m³ (depending on colour)
    Mixing ratio 80 : 20 by weight (A:B)
    Application temperature min. 10 °C and max. 30 °C
    Drying time min. 16 hours and max. 48 hours

    Once fully cured

    Shore A hardness (DIN 53505) ~ D 65
    Tensile strength ~ 14 MPa
    Tear resistance (DIN 52455-A1) (DIN 53515) ~ 65 N/mm
    Elongation at break (DIN 52455-A1) 95%

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors indoors
    • For professional users only
    • Seamless, wear resistant floor finish for several application areas
    • Examples of application areas are: education, healthcare, residences, offices and public buildings
    • Retail
    • Leisure Facillities
    • Pharmaceutical Laboratories
    • Can be used as part of the Décor Marbled Resin Systems
    • For use by professionals


    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, capable of bearing a load, and free from substances that may impair adhesion (oil, grease, wax).

      • Preparations

        To ensure a permanent bonding of a synthetic finish, a correct pre-treatment of the substrate is necessary. This applies to both existing and new substrates. Before the PUR Deco Color Bright is applied, the substrate needs to be fitted with a primer from the Remmers range. On concrete floors and sand cementious screeds, apply as a primer. A manual about substrate pre-treatment is available on request.

    • Application
      • Application temperature: min. 10 °C max. 30 °C
      • Application requirements

        Temperature of the material, air and substrate: min. 10 °C and max. 30 °C.
        The temperature of the substrate must be at least 3 °C above the dew point.

    • Application instructions
      • Drying time: can be worked over after 16 h
      • Drying

        The drying and curing times of the PUR Deco Color Bright, at a layer thickness of 2 mm are as follows:
        - recoatable : after 16 hours and a maximum within 48 hours at 20 °C
        - fully cured : after 7 days at 20 °C

    • Working tools / cleaning
      • Straight or toothed trowel. Spike roller

      • Clean tools immediately after use with V 101 Thinner.

    • Storage / shelf life
      • Store frost-free / close containers
      • Shelf-life 12 months
      • In the original, unopened packaging, stored in a dry place between 5 °C and 25 °C, minimum 12 months.

        May not be stored or exposed to temperatures beneath 5 °C.

    • Usage
      • 1.5 kg / mm thick layer / m²
      • The consumption is approx. 1,5 kg/m² per mm layer thickness

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.