• Tex 4/100

    Article No. 388001

    Tex 4/100

    E-glass reinforcement fabric covered with polymeric plastics

    Variant
    3880 | Tex 4/100
    Packaging unit

    Product specifications

    On delivery

    Mesh size 4 x 4 mm
    Surface weight Approx. 160 g/m²
    Warp tear strength Min. 2100 N
    Weft tear strength Min. 2200 N

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • Absorption of movements of the substrate
    • Crack repair
    • Composite thermal insulation systems
    • Reinforcement of the iQ Top, iQ Top SLS and Power Protect [eco] systems

    Properties

    • Permanently elastic
    • Rot-proof
    • Alkali-resistant
    • Non-slip
    • Application
      • Stapling

        Staple the fabric on the sanded, vacuumed wood planks after priming the substrate and allowing to dry. Staple approx. 6 times per m².

        Overlapping zone ≥ 10 cm lengthwise and crosswise.

        Adhesive bonding

        Push the fabric into the coating mass over its entire area.

        Overlapping zone ≥ 10 cm lengthwise and crosswise.

    • Storage / shelf life
      • Protect form moisture
      • Shelf-life 24 months
      • Store upright in original container in a dry place.

    • Usage
      • Total application rate approx. 1.1 m² / m²
      • Approx. 1.1 m²/m²

    • General information
      • Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • The product must be disposed of in accordance with the official regulations.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.