Article No. 1205
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Pointing paved surfaces
Properties
- Can withstand light loads
- Only suitable for outdoor applications
- Not suitable for surfaces subjected to wheel loads
-
Preparation
-
Preparations
Prepare the surface according to the expected loads.
Subsequent loads may not cause settlement of the surface or structural loosening.
-
-
Application
-
Spread the ready-to-use product onto the plaster and work into the joints using a suitable broom or rubber scraper.
Remove the excess with a dry broom by sweeping several times.
Compact with a jointing iron if necessary.
-
-
General information
-
Unless otherwise specified, all of the values and application rates given above have been determined under laboratory conditions (20 °C). Slight deviations from these values may arise if the product is worked with on site.
The material is not generally colour-fast.
Joint width: min. 8 mm Joint depth: min. 30 mm
Do not use on natural, synthetic or concrete stone slabs with chamfer or on roads and streets.
Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.
-
-
Safety / regulations
-
For professional users only!
Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.
Wear safety goggles and gloves.
-