Color LF

Dry, clean, free of dust and cracks and capable of supporting a load.

Free of salts known to be damaging to building materials.

Remove any old coatings not capable of supporting a load, making sure not to leave any residue.

Prime sanding, well adhering substrates with Primer Hydro F (art. 2842).

Temperature of material, surroundings and substrate: min. +5 °C - max. +25 °C.

Stir well.

Coat the surface using a suitable tool.

Depending on the conditions of the substrate, apply 1 or 2 coats.

Wait at least 8 hours between coats.

Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

When coating continuous surfaces, only use materials with the same batch number.

Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required.

Brush, lambskin roller, airless spraying equipment

Clean tools, equipment and any splashed material immediately with water while still fresh.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

Approx. 0.13 - 0.15 l/m² per coat

The application rate depends on the absorbency of the surface

Apply to a large enough trial area to determine the precise amount required.

Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

Always set up a trial area/trial areas first.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.