Article No. 237405

    Aqua PL-413 Parquet Varnish

    Clear, single-component sealing varnish for application by roller

    Product specifications

    On delivery

    Binder Acrylate/PU dispersion
    Density (20°C) Approx. 1.04 g/cm³
    Odour Low-odour
    Runout time s in DIN 4 cup Approx. 25

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Interior wood
    • For wooden surfaces in living areas that are subjected to heavy use
    • For use in residential and other buildings (e.g. parquet, steps, floorboards)

    Properties

    • Resistant to abrasion and scratches
    • Excellent emphasis of the grain
    • Excellent water resistance
    • Good flow properties on horizontal surfaces
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood moisture content: 8-12%

      • Preparations

        Sand wood using P 100 - 180 grit.

        Wash off greasy or resin-rich woods/substrates with WV-891 or V-890.

        Remove resin galls.

    • Application
      • Application requirements

        Temperature of the material, air and substrate: from min. +18°C bis max. +25°C.

      • Shake well before use.

        Apply using a brush or roller.

        Once dry, apply the next coat on the same day.

        After drying and intermediate sanding (P 180 - 320), apply a finishing coat.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        Only use Aqua H-480 Hardener in the finishing coat (use the patent disperser to mix).

      • Drying

        Dust-dry: after approx. 1 hour Ready for next coat: after approx. 4 hours Full loading capacity: after approx. 7 days

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Ready to use. If necessary, dilute with max. 5% water. If necessary, dilute the varnish/hardener mixture with max. 10% water.

    • Working tools / cleaning
      • Sealant roller with microfibre cover, pile height approx. 8-12 mm, acrylic brush

      • Clean tools immediately after use with water and detergent.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • 100 - 120 ml/m² per coat

    • General information
      • On swaying wooden flooring or wooden flooring that is not resistant against shear forces, as well as on heated flooring, there is a risk of torn joints due to the tendency of aqueous sealants to bond at the sides. In such cases, we recommend priming with Aqua MSV-403 Parquet Primer.

        Use breathable materials to cover the wood components once varnished.

        Clean once a week as required by adding Varnished Floor Care to the water used for cleaning.

        Observe the "Care instructions for varnished floors and stairs".

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.