Article No. 182701
For producing a brushing quality from spraying quality using Induline Mix & Go brushing additive
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Dimensionally stable wood building elements: wood moisture content 11-15%
Carry out intermediate sanding before applying a final coat: P 220-240, remove sanding dust.
Observe BFS Code of Practice No. 18 "Coatings on Wood and Wooden Working Materials in Outdoor Areas".
Temperature of the object, air and material: 10 - 25 °C Do not use in direct sunlight Do not use in damp, foggy or rainy conditions Protect freshly treated surfaces against dust, dirt etc.
Apply using a brush or roller.
Seal opened containers well and use contents as soon as possible.
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
Areas that are being coated or dried should be protected against rain, wind, sunlight and condensation.
Use suitable adhesive tape (e.g. tesa® Maler-Krepp Precision Outdoor 56251) to mask all surfaces that are not to be coated.
Make sure that there is no streaking.
Any adhesive tape used must be carefully removed from the substrate after around 30 minutes.
Using a short-pile roller (Storch Art. No. 148918 is especially suitable), apply the lacquer evenly in strips from one window corner to another, or in continuous lengths for other components.
Plan your work in such a way that the entire application process can be completed within five minutes.
Dust-dry: after approx. 1 hour Ready for gentle use: after approx. 4-6 hours Fully hardened: after approx. 48 hours
Practice values at +20 °C and 65% relative humidity.
The coating may take significantly longer to dry thoroughly in lower temperatures, at high humidity or if the maximum layer thickness has been exceeded.
Acrylic brush, microfibre paint roller
Clean tools immediately after use with water and detergent.
Ensure that any residue from cleaning is disposed of correctly.
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.
Approx. 80 ml/m² per coat
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.