Article No. 718101
Water-based impregnation to protect against rot and blue stain
Hazard warnings
- Use biocides safely. Always read the label and product information before using!
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Exterior wood with no ground contact
- Soft and hard woods
- Dimensionally stable wood building elements: e.g. windows and doors
- Wood building elements with limited dimensional stability, e.g. folding shutters, matchboarding, summerhouses
- Wood building elements with no dimensional stability: e.g. fences, framework, carports, planking
- Never use this product to treat wood surfaces in rooms where people gather; the only exception to this is the insides of windows and doors.
Properties
- Preventive protection against wood-staining fungi (blue stain) & wood-destroying fungi (rot)
- Provides protection against moisture, especially in end-grain areas
- Reduces staining in the system build-up with coloured primers
- Quick drying
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances.
Dimensionally stable wood building elements: wood moisture content 11-15%
Wood building elements with limited or no dimensional stability: wood moisture content max. 18%
-
-
Application
-
Stir well, including during application or after a break in work.
Qualified specialist companies: brushing, dipping, flow-coating and spraying in closed systems only.
Once dry, apply further coatings.
Seal opened containers well and use contents as soon as possible.
-
Application instructions
-
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
Before coating technically modified woods and wood-based materials, apply the product to a trial surface and conduct a suitability test on the desired area of use.
If foaming occurs in the flow coating system, it is recommended to add 0.2-1.0% Induline A-302.
If viscosity increases (e.g. due to evaporation), water must be used to make up for the lost moisture (target viscosity: approx. 45 s in a 2 mm DIN flow cup or approx. 21 s in a 3 mm ISO flow cup).
-
Drying
Recoatable: after approx. 4 hours
(at 23 °C and 50 % relative humidity)
Recoatable with forced drying: after approx. 90 minutes
(20 minutes run-off time/50 minutes drying phase (35–40 °C)/20 minutes cooling phase)Low temperatures, poor ventilation and high humidity delay drying.
-
Thinning
If the viscosity increases (e.g. due to evaporation), it must be adjusted by adding water.
-
Working tools / cleaning
-
Brushes, dipping tanks, flow coating facilities, spraying facilities
-
Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.
Ensure that any residue from cleaning is disposed of correctly.
-
Storage / shelf life
-
Store in well-sealed, original containers, out of the reach of children and in a dry, cool, well-ventilated room which is protected from direct sunlight and frost. No smoking is permitted in storage areas.
Do not transport or store the product at temperatures below 5 °C.
-
Usage
-
80 - 90 ml/m²
-
General information
-
In accordance with DIN 68800-1, wood preservation measures must be planned in a timely and careful manner in coordination with all parties involved in the construction (architect, client, contractor) taking into account legal requirements and local conditions.
Observe the information sheets “Upkeep and Maintenance of Dipping Tanks and Flow Coating Facilities” and “Information on Workplace Hygiene”.
-
-
Disposal instructions
-
Larger product residues must be disposed of in the original packaging in accordance with the applicable regulations.
Do not pour liquid coating or residues down the drain, even when cleaning tools. Must not be disposed of with household waste. Completely empty packaging must be recycled.European waste code 03 02 02* organochlorinated wood preservatives
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
