Article No. 238605

    Aidol PU-Holzersatzmasse

    Variant
    2386 | Aidol PU-Holzersatzmasse
    Packaging unit

    Product specifications

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For reconstructing wood building elements
    • Beams in framework
    • Beam end repairs
    • Laminated wood
    • Window renovation

    Properties

    • Wood effect
    • Water vapour permeable
    • High compressive strength
    • Can be overcoated
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Permitted wood moisture content: u < 18%

      • Preparations

        Create a stable form (e.g. laminated board) in the original dimensions of the wood building element and line with release paper.

        For larger batches (> 3 kg), the mould must also be secured with screw clamps. Do not exceed the maximum batch size of 7.5 kg (risk of bursting).

    • Application
      • Pour the compound into the void, compact with a trowel, cover with release paper and seal tightly.

        Remove the mould after 24 hours.

        Reconstructed areas can be sanded and provided with decorative coatings after 7 days.

    • Application instructions
      • During application, do not allow any additional moisture to enter the reaction process.

        Protect the product from moisture.

    • Working tools / cleaning
      • Clean tools immediately after use with V 101 Thinner. Dispose of the remains from cleaning properly.

        The material can no longer be cleaned off once it has dried or hardened.

    • Storage / shelf life
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 6 months.

    • General information
      • If the safety of load-bearing and bracing wooden components is compromised, a structural engineer must be consulted. To help the structural engineer on site, a statics model has been developed to aid with dimensioning (rod dowels, flat steel thickness) during renovation.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.