Article No. 321705

    Aqua IF-431-1K-Isolierfüller

    Colour: Aqua IF-431-1K-Isolierfüller | 3217
    Packaging unit

    Product specifications

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Preparing opaque, pigmented varnishes
    • Solid wood & veneers
    • Wood materials
    • AW_HB_135
    • High-quality furniture
    • Wooden stairs
    • In damp rooms (kitchens and bathrooms)
    • Interior finishing work: e.g. panels, borders, cladding & interior doors

    Properties

    • Single-component: simple and economical handling
    • EG_HB_44
    • EG_HB_46
    • Good sanding properties
    • EG_HB_45
    • Can be coated over with Aqua and PUR varnishes
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood moisture content: 8-12%

      • Preparations

        Wash off greasy or resin-rich woods/substrates with WV-891 or V-890.

        Softwoods: sand with P 80 - 120.

        All other substrates: sand with P 180 - 320.

    • Application
      • Stir well.

        Spray.

        Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.

        Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.

        Flow cup gun: nozzle size: 2.0 - 2.5 mm; atomiser air pressure: 2.0 - 3.0 bar.

        Once dry, carry out intermediate sanding with P 240-320.

        Repeat the process if necessary.

        Intermediate and final coats of suitable products can be applied after drying.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • VA1_HB_32

        Check colour, adhesion and compatibility with the substrate by setting up a trial area.

      • Drying

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

    • Working tools / cleaning
      • Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

    • Storage / shelf life
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • General information
      • The product’s insulating effect may be impaired if it is diluted too thinly, if the wood is too wet or if the recommended coating sequence, application volumes and drying times are not observed. With water-based coating systems, there is always the residual risk that substances contained in the wood will leach out.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.