Article No. 541401
Water-based pigment stain for rustic effects with classic wood tones and semi-transparent bright and grey shades (colour stain)
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Interior wood
- Wood tones: coarse-pored wood such as oak, ash, walnut, mahogany, wenge
- As a colour stain in bright, white and grey shades: fine-pored wood such as birch, maple, beech and coarse-pored woods such as ash
- Production of translucent varnishes
Properties
- Stain finish for wood colours: rustic, emphasises pores
- Stain finish as colour stain in bright, white and grey shades: semi-transparent to opaque
- Colours: wide range of wood tones, bright, white and grey shades
- Very good light-fastness
- All colours are mixable with one another
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Wood moisture content: 8-12%
-
Preparations
Wash off greasy or resin-rich woods/substrates with WV-891 or V-890. Use UN-894 indoors on the construction site. Ensure good ventilation for solvents.
Wet if necessary.
Sand the raw wood with P 120 - 180.
Brush wood pores if necessary.
Apply the stain immediately after sanding.
-
-
Application
-
Stir well, including during application or after a break in work.
Apply material evenly with a brush or by spraying.
It is recommended to apply by spraying then touch up with the brush.
Flow cup gun: nozzle size: 1.6 - 2.0 mm; atomiser air pressure: 1 - 2 bar
Seal opened containers well and use contents as soon as possible.
-
-
Application instructions
-
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
Do not use as a colour stain in bright, white and grey shades on wood types with a high content of active substances (e.g. oak, mahogany), as this can result in discolouration.
If necessary, the transparency can be adjusted with Aqua-HB-053-P clear.
Overcoat with water-based or solvent-based clear varnishes. For optimum protection of the stained wood against premature optical changes due to UV radiation, ULM-822 Universal Light Stabiliser can be added to the clear varnish.
-
Drying
Practice values at +20 °C and 65% relative humidity.
Low temperatures, poor ventilation and high humidity delay drying.
-
-
Working tools / cleaning
-
Flow cup gun, paintbrush with natural bristles (metal-free ferrule)
Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.
Ensure that any residue from cleaning is disposed of correctly.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
80 - 120 ml/m² (plus spraying loss)
-
-
General information
-
Pour diluted stain into a rust-proof container and use up promptly.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
