Article No. 541001
Water-based dye stain for brilliant colours and high-grade wood
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Interior wood
- Fine-pored hardwood: e.g. beech, maple, cherry, birch
- Coarse-pored wood: e.g. oak, walnut, ash
- Production of translucent varnishes
Properties
- Stain finish: does not emphasise pores, brilliant transparent finish
- Colours: wide range of wood tones
- Optimal light-fastness
- All colours are mixable with one another
- Can be used under Aqua varnishes (no bleeding)
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Wood moisture content: 8-12%
-
Preparations
Wash off greasy or resin-rich woods/substrates with WV-891 or V-890. Use UN-894 indoors on the construction site. Ensure good ventilation for solvents.
Wet if necessary.
Sand the raw wood with P 120 - 180.
Brush wood pores if necessary.
Apply the stain immediately after sanding.
-
-
Application
-
Stir well, including during application or after a break in work.
Apply material evenly with a brush or by spraying.
Fine-pored wood: spray without dispersing; coarse-pored wood: spray with dispersing.
Flow cup gun: nozzle size: 1.0 - 1.6 mm, atomiser air pressure: 1.0 - 2.0 bar.
Seal opened containers well and use contents as soon as possible.
-
-
Application instructions
-
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
Overcoat with water-based or solvent-based clear varnishes. For optimum protection of the stained wood against premature optical changes due to UV radiation, ULM-822 Universal Light Stabiliser can be added to the clear varnish.
-
Drying
Practice values at +20 °C and 65% relative humidity.
Low temperatures, poor ventilation and high humidity delay drying.
-
-
Working tools / cleaning
-
Flow cup gun, paintbrush with natural bristles (metal-free ferrule)
Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.
Ensure that any residue from cleaning is disposed of correctly.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
80 - 120 ml/m² (plus spraying loss)
-
-
General information
-
Pour diluted stain into a rust-proof container and use up promptly.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
