• iQ-Top SLS

    Article No. 023020

    iQ Top SLS

    Reinforcement and thin-layer plaster

    Colour: | 0230
    Size / Quantity

    Brochures and Catalogues


    Product specifications

    On delivery

    Aw value / water absorption coefficient 13.32 kg/(m²h0.5)
    Fire class A1
    Layer thickness 2 - 5 mm
    Bulk density Approx. 0.8 kg/dm³
    w80 0.0317 m³/m³
    Water requirement Approx. 7.0 - 7.5 l/20 kg
    Water vapour diffusion resistance µ 14
    wsat 0.5211 m³/m³
    Thermal conductivity λ 0.479 W/(m•K)
    Compressive strength class CS II (1.5 - 5.0 N/mm²)

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • Reinforcement and thin plaster coat in the iQ-Therm system


    • Inhibits mould
    • Water vapour permeable
    • Highly capillary active
    • Total layer thickness approx. 5 mm
    • Preparation
      • Substrate requirements

        Clean, dust-free and capable of supporting a load.

      • Preparations

        Pre-wet the substrate so that it is slightly moist.

    • Application
      • Mortar cover / Filling knife / Trowel application
      • Application temperature: min. 5 °C max. 30 °C
      • Using a suitable tool, apply the product as a contact layer.

        Using a toothed trowel, apply the material in a coating thickness of 3 mm.

        Embed reinforcement fabric in the upper third of the render, with fabric widths overlapping by at least 10 cm.

        Apply the second layer while the first is still wet.

        Smooth the surface using a suitable tool.

        Finish the surface once set.

    • Application instructions
      • Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.

        Depending on the ambient conditions, in heated rooms or draughty areas, use a film or similar apparatus to prevent the material from setting too quickly.

        Hairline/shrinkage cracks are safe and are not cause for complaint as they do not impair the properties of the mortar.

        Apply additional diagonal reinforcement to the edges of building openings.

    • Working tools / cleaning
      • Mortar cover / Filling knife / Trowel application
      • Mixing tool, toothed trowel, trowel, smoothing trowel, felt float trowel, sponge float

      • Clean tools with water while the material is still fresh.

    • Storage / shelf life
      • Protect form moisture
      • Shelf-life 12 months
      • If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

    • Usage
      • approx. 0.9 kg / mm thick layer / m²
      • Approx. 0.9 kg/m²/mm layer thickness

    • General information
      • The mixing water must be of drinking water quality.

        May contain traces of pyrite (iron sulphide).

        Do not use on gypsum-based substrates.

        Low chromate content in accordance with Directive 2003/53/EC.

        Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

        Manufacturing plant: Remmers Baustofftechnik Produktions GmbH, Bad Düben

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.