Article No. 108705
Mineral corrosion protection and bonding layer
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Clean, dust-free and capable of supporting a load.
Expose all steel parts, derust to a degree of purity of SA 2½
Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C
Apply to layers of grout with a thickness of 1 mm each making sure the entire surface is covered.
Waiting time between layers: 1 - 24 hours.
Follow-up work must be carried out wet ond wet.
Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.
Clean tools with water while the material is still fresh.
If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.
Approx. 1.8 kg/m² per coat
The mixing water must be of drinking water quality.
Betofix R4 PCC concrete replacement system does not require a separate bonding layer (see basic examination for system structure).
The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity.
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.