Article No. 314601

Aqua CL-445 Colour Opaque 4 in 1

1-component, multi-layer colour varnish for use as sealing layer, filler, coloured coating and topcoat

Remmers Button 2K Ready Aqua VGA-485
Variant
Colour: white (RAL 9016) | 3146
Colour: white (RAL 9016) | 3146
Please choose a colour

Product specifications

Binder Acrylate/PU dispersion
Density (20°C) 1.04-1.2 g/cm³
Odour Characteristic

The stated values represent typical product characteristics and are not to be construed as binding product specifications.

Field of application

  • For use indoors
  • for interior doors
  • for furniture
  • For professional users only
  • Interior wood
  • Solid wood and wood-based materials
  • Interior finishing work: e.g. panels, borders, cladding & interior doors
  • High-quality furniture

Properties

  • Water-based
  • Single-component: simple and economical handling
  • Functions: sealing layer, filler, coloured coating and topcoat
  • Good flow properties
  • Quick-drying
  • Good hiding power
  • Very high resistance to metal rings
  • Good resistance to chemicals
  • Good resistance to a wide range of commercially available hand creams
  • Lightfast
  • Fire resistant
  • 2K-ready: further improvement of the resistance to chemicals and scratches, as well as adhesion to glass, by adding 2% Aqua VGA-485 (isocyanate-free)
  • Preparation
    • Substrate requirements

      The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

      Wood moisture content: 8-12%

      MDF boards: bulk density >= 700 kg/m³

    • Preparations

      Wash off greasy or resin-rich woods/substrates with WV-891 or V-890. Use UN-894 indoors on the construction site. Ensure good ventilation for solvents.

      Sand wood using P 100 - 180 grit.

      Sand panels using P 180 - 320 grit.

  • Application
    • Application temperature: min. 18 °C max. 25 °C
    • Use Patent disperser
    • Airless/airmix spraying / Flow cup gun
    • Stir well, including during application or after a break in work.

      Spray.

      Flow cup gun: nozzle size: 2.0 - 2.5 mm; atomiser air pressure: 2.0 - 3.0 bar.

      Airmix spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 100 bar, atomiser air pressure: 1.2 - 2 bar.

      Airless spraying: nozzle size: 0.23 - 0.28 mm, material pressure: 80 - 120 bar.

      Use a coarse push-in filter for dull matt and textured products.

      After drying and intermediate sanding (P 240 - 320), apply a second coat of the product.

      Repeat the process if necessary.

      Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required.

      Seal opened containers well and use contents as soon as possible.

  • Application instructions
    • Drying time: can be worked over after 3-4 h
    • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

      Before coating technically modified woods and wood-based materials, apply the coating to a trial surface and conduct a suitability test on the desired area of use.

      The ring resistance and the tendency of the surface to shine up under mechanical stress are strongly dependent on the gloss level selected: higher gloss levels are generally more robust here than extremely matt finishes. In the case of increased, constant stress, a clear coating may therefore be advisable.

      To ensure optimum resistance to metal rings and to improve the resistance to chemicals, we recommend coating with a suitable, light-fast clear varnish.

      When coating surfaces finished with a coloured varnish, add 5-10% of the Aqua colour varnish to the clear varnish in order to counteract changes in the colour shade.

    • Drying

      Dust-dry: after approx. 1 hour
      Ready for overcoating: after approx. 3-4 hours

      Practice values at +20 °C and 65% relative humidity.

      Low temperatures, poor ventilation and high humidity delay drying.

    • Thinning

      Ready to use; dilute with 2-5% water if necessary.

  • Working tools / cleaning
    • Airless/airmix spraying / Flow cup gun
    • Airless/Airmix spraying equipment, flow cup gun

    • Airless/airmix spraying equipment, flow cup gun

      Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

      Ensure that any residue from cleaning is disposed of correctly.

  • Storage / shelf life
    • Store frost-free and cool / protect for moisture / close containers
    • Shelf-life 12 months
    • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

  • Usage
    • Approx. 150 ml - 200 ml / m² per layer applied
    • 150-200 ml/m² per coat, min. 2 coats

  • General information
    • DIN EN 71-3 "Migration of certain elements":

      This product complies with the limits for the migration of heavy metals to children's toys according to DIN EN 71-3 and thus fulfils one of several further requirements for the safety of children's toys according to the EU "Toy Directive" (2009/48/EC).

      To preserve the quality of the surface, we recommend regular cleaning and care using a lint-free cotton cloth. Please use solvent-free and silicone-free cleaning agents.

      Please refer to the relevant test reports/certificates and the Technical Data Sheet for information on certified products and configurations.

  • Disposal instructions
    • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

  • Safety / regulations
    • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.