Article No. 338868
Water-based, universal, translucent primer for interior and exterior wood building elements with limited or no dimensional stability
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- For use on interior and exterior wood
- Soft and hard woods
- Wood building elements with limited dimensional stability, e.g. folding shutters, matchboarding, summerhouses
- Wood building elements with no dimensional stability: e.g. fences, framework, carports, planking
- Temporary protection against dirt for laminated beams during transport and construction
Properties
- Can be stacked wet-on-wet
- Quick-drying
- Water-based: does not give off any unpleasant odours and tools can be cleaned with water
- Breathable
- Does not flake
-
Preparation
-
Substrate requirements
The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.
Wood building elements with limited or no dimensional stability: wood moisture content max. 18%
-
Preparations
If necessary, impregnate non-resistant woods with a wood preservative* (*Use biocides safely. Always read the label and product information before use).
-
-
Application
-
Stir well, including during application or after a break in work.
Immersion and flow coating.
Industrial series production (vacuum procedure)
Apply using a brush or roller.
Once dry, apply further coatings.
Seal opened containers well and use contents as soon as possible.
-
-
Application instructions
-
Check colour, adhesion and compatibility with the substrate by setting up a trial area.
Before coating technically modified woods and wood-based materials, apply the product to a trial surface and conduct a suitability test on the desired area of use.
Prior to full application, please apply a test coat to a sample area under practical conditions using the desired system, then test or examine the surface properties.
Ensure good ventilation.
The product is suitable for the climatic load group "outdoor climate" (protected construction) in accordance with DIN 50010-1. In cases where wood is directly exposed to weather only, a coating suitable for exterior use must be applied after no more than 4 weeks.
-
Drying
Ready for overcoating: after approx. 1 hour
Practice values at +20 °C and 65% relative humidity.
Low temperatures, poor ventilation and high humidity delay drying.
-
Thinning
Ready to use
-
-
Working tools / cleaning
-
Dipping tank, flow coating facility, VACUMAT® vacuum coating equipment, paintbrush, roller
-
Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.
Ensure that any residue from cleaning is disposed of correctly.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
30 - 80 ml/m²
-
Depending on the processing method, wood type and wood surface.
-
-
General information
-
Observe the information sheets “Upkeep and Maintenance of Dipping Tanks and Flow Coating Facilities” and “Information on Workplace Hygiene”.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
