Induline SW-962

The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

Permitted wood moisture content: u < 18%

Stir well, including during application or after a break in work.

Industrial series production (VACUMAT^®, board coating machine)

Seal opened containers well and use contents as soon as possible.

Check colour, adhesion and compatibility with the substrate by setting up a trial area.

Before coating technically modified woods and wood-based materials, apply the product to a trial surface and conduct a suitability test on the desired area of use.

Prior to full application, please apply a test coat to a sample area under practical conditions using the desired system, then test or examine the surface properties.

VACUMAT®, board coating machine

Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

Ensure that any residue from cleaning is disposed of correctly.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 6 months.

80 - 120 ml/m² depending on the absorbency of the substrate (ready-to-use solution)

Larger product residues must be disposed of in the original packaging in accordance with the applicable regulations.
Do not pour liquid coating or residues down the drain, even when cleaning tools. Must not be disposed of with household waste. Completely empty packaging must be recycled.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.