• Clean FL

    Article No. 065101

    Clean FL

    Cleaning concentrate for MB FL 2K

    Variant
    0651 | Clean FL
    Size / Quantity

    Product specifications

    Density (20°C) Approx. 0.98 g/cm³
    Odour Mild

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For professional users only
    • Removing streaks and build-up of MB FL 2K on ceramic coverings
    • Secondary cleaning of tiling that has undergone preliminary cleaning
    • Cleaning tools

    Properties

    • Water-based
    • High-yielding concentrate
    • Also removes stubborn deposits of MB FL 2K
    • Application
      • Apply the material uniformly on the dry substrate and allow to take effect.

        After leaving to act for a suitable working time, scrub with a scrubbing brush or Scotch-Brite sponge and wipe off with the foam rubber float.

        The working time and application rate depend on the amount of material to be removed.

        Repeat the process if necessary on heavily soiled surfaces.

        Rinse surfaces with clear water after every cleaning procedure.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Temperature of the material, air and substrate: from min. +15 °C to max. +30 °C
      • Always set up a trial area/trial areas first.

        Leaving the cleaning agent to act for long periods may cause damage.

        Ensure good ventilation.

        Use suitable measures to protect nearby components and materials that are not intended to come into contact with the product

      • Thinning

        Dilute the concentrate with water

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Depending on cleaning requirements:
        10% solution in water for normal cleaning requirements
        20% solution in water for heavy cleaning requirements
        Undiluted for stubborn material deposits

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products