Article No. 067105
Surfactant solution for removing grime, dirt incrustation, dust, oil and grease deposits
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Mechanically remove coarse soiling.
Moisten the surface to be cleaned with water.
Depending on the intensity of the contamination, produce a dilution with a concentration of 1:5 to 1:20.
Set up a trial area to determine the cleaning effect.
Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C
Use a suitable tool to apply the solution that has been prepared for the contamination at hand.
Work in the material using a scrubbing brush.
When using a high-pressure cleaner, pour approx. 0.5% of the product into the bypass tank.
Wash off thoroughly.
Remove cleaning agent until no residues remain.
If needed, repeat the application.
Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.
Set up the necessary collection receptacles.
Scrubbing brush, high-pressure cleaner, steam jet
Clean tools with water immediately after use.
At least 36 months in unopened, original containers stored cool, dry and protected from frost.
Approx. 0.01 – 0.05 ml/m² depending on the type of contamination
Apply to a large enough trial area to determine the precise amount required.
Residue left from cleaning may have a negative influence on subsequent impregnation.
The applicable regulations and legal requirements must be observed.
Always set up a trial area/trial areas first.
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.