• Clean WR

    Article No. 067530

    Clean WR

    Acidic cleaner

    Variant
    0675 | Clean WR
    Size / Quantity

    Product specifications

    Density (20°C) Approx. 1.04 g/ml
    pH value (20 °C) Approx. 1.0

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • Mineral substrates
    • Tiles and slabs

    Properties

    • Water-based
    • Free of tensides
    • Ready to use
    • pH-value approx. 1.0
    • Preparation
      • Preparations

        Mechanically remove coarse soiling.

        Pre-wet the substrate being cleaned with water.

    • Application
      • Application temperature: min. 5 °C max. 30 °C
      • Scrub brush / Scrubber / High pressure cleaner
      • Application requirements

        Temperature of material, surroundings and substrate min. +5 °C up to max. +30 °C

      • Apply the material using suitable equipment.

        Work in the material using a scrubbing brush.

        Re-wash after sufficient reaction time.

        Treat large surfaces with hot water pressure or steam-jet degreaser.

        If needed, repeat the application.

    • Application instructions
      • Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        Set up the necessary collection receptacles.

        Cleaner residue may lead to lime sinter.

        Dark joints may be lightened by cleaning.

    • Working tools / cleaning
      • Scrub brush / Scrubber / High pressure cleaner
      • Srubbing brush, mop, high-pressure cleaner, steam-jet degreaser

      • Clean tools with water immediately after use.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • At least 36 months in unopened, original containers stored cool, dry and protected from frost.

    • Usage
      • Total application/absorption rate 300 ml - 500 ml Total / m²
      • Approx. 0.3 - 0.5 l/m², depending on the degree of contamination

      • Apply to a large enough trial area to determine the precise amount required.

    • General information
      • The material only dissolves impurities containing lime and not any other dirt deposits.

        The applicable regulations and legal requirements must be observed.

        The relevant test certificates must be observed when planning and carrying out work.

        Always set up a trial area/trial areas first.

    • Disposal instructions
      • Dispose of larger quantities of leftover product in the original container in compliance with valid regulations. Completely empty containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products