• Silicone Resin Paint LA - Clear
  • Silicone Resin Paint LA - Clear
    • Silicone Resin Paint LA - Clear
    • Silicone Resin Paint LA - Clear

    Article No. 641005

    Silicone Resin Paint LA - Clear

    Transparent, diluting additive for silicone resin paint systems used to adjust the degree of scumble

    Colour: clear | 6410
    Size / Quantity

    Brochures and Catalogues

    product.brochures.loading

    Product specifications

    Binder low molecular silicone resin emulsion; pure acrylate dispersion
    Density (20°C) 1.05 g/cm³
    pH value 8-9
    Viscosity 500 mPa∙s

    Once fully cured

    Degree of gloss matt, mineral character
    Surface structure smooth

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors and outdoors
    • Adjustment of the degree of scumble for Remmers silicone resin paint systems

    Properties

    • Water-based
    • Clear
    • Repels water
    • Application
      • Application temperature: min. 5 °C max. 25 °C
      • By brush / By roller
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C

      • Stir well.

        Mix with the system products until the desired degree of scumble is achieved.

    • Application instructions
      • Silicone resin paint LA - clear - may only be used as a diluting agent to adjust the degree of scumble and cannot be applied without being mixed first.

    • Working tools / cleaning
      • By brush / By roller
      • Brush, surface brush, lambskin roller

      • Clean tools with water while the material is still fresh.

        Clean splashed material with water while the material is still fresh.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 12 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Depending on the application / m²
      • Varies depending on the desired degree of scumble

      • Application rates may vary depending on the condition of the surface.

        Apply to a large enough trial area to determine the precise amount required.

    • General information
      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        Always set up a trial area/trial areas first.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products

    Tools, accessories and PPE