Article No. 055625
High-strength, swellable grouting concrete
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Clean, dust-free and capable of supporting a load.
Pre-wet the substrate so that it is slightly moist.
Expose the grains close to the surface
The substrate must have an average pull-off strength of at least 1.5 N/mm²
Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C
Shutter if necessary.
Pour continuously from one side or corner.
Re-compact if necessary.
Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.
Protect wet mortar surfaces against frost, rain and drying out too quickly for at least 4 days.
Mixer: twin-shaft mixer, compulsory mixer If using a mixing pump, use a batch mixer.
Clean tools with water while the material is still fresh.
If stored dry in closed containers, the product will keep for approximately 9 months.
Approx. 2.1 kg/l cavity
The mixing water must be of drinking water quality.
Low chromate content in accordance with Directive 2003/53/EC.
The characteristic data given for the product was determined under laboratory conditions in accordance with DAfStb Guideline - VeBMR.
Alkaline binders may cause a dissolution process on non-ferrous metals.
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.