Article No. 641005
Transparent, diluting additive for silicone resin paint systems used to adjust the degree of scumble
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Adjustment of the degree of scumble for Remmers silicone resin paint systems
Properties
- Clear
- Repels water
-
Application
-
Application requirements
Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C
-
Stir well.
Mix with the system products until the desired degree of scumble is achieved.
-
Application instructions
-
Silicone resin paint LA - clear - may only be used as a diluting agent to adjust the degree of scumble and cannot be applied without being mixed first.
-
-
Working tools / cleaning
-
Brush, surface brush, lambskin roller
-
Clean tools with water while the material is still fresh.
Clean splashed material with water while the material is still fresh.
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
Usage
-
Varies depending on the desired degree of scumble
-
Application rates may vary depending on the condition of the surface.
Apply to a large enough trial area to determine the precise amount required.
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
Always set up a trial area/trial areas first.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-