• FL_fix_white

    Article No. 285025

    FL fix white

    White natural stone and tile cement

    Colour: white | 2850
    Size / Quantity

    Product specifications

    Foot traffic/ready for use Approx. 3 hours
    Loading Approx. 24 hours
    Cement bed thickness Up to max. 15 mm
    Open time Approx. 30 minutes (depending on temperature)
    Bulk density Approx. 1.2 kg/dm³
    Water requirement Approx. 6.75 l/25 kg

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • Bonding wall and floor coverings made of natural stone
    • Laying ceramic wall and floor coverings
    • Bonding glass mosaic and glass tiles
    • For interior and exterior use
    • Dry, wet and underwater environments
    • Levelling of substrates with unevenness up to 5 mm


    • White binder
    • Rapid water binding
    • High adhesive pull strength (C 2)
    • Fast setting (F)
    • High slip resistance (T) and bond strength
    • Extended open time (E)
    • Flexible (S 1)
    • Very low emissions (GEV-EMICODE EC 1Plus)
    • Preparation
      • Substrate requirements

        Clean, dust-free and capable of supporting a load.

      • Preparations

        Level the substrate.

        Pretreat highly absorbent substrates with Primer Hydro F.

    • Application
      • Application temperature: min. 5 °C max. 30 °C
      • Mortar cover / Filling knife / Trowel application
      • To increase the adhesive pull strength, apply a scratch coat (contact layer) first.

        Apply the product directly using a suitable toothed trowel.

        Lay the surface covering on the wet mortar bed, pushing down gently.

        Remove wet mortar residue from the top of the surface covering promptly.

        Remove excess mortar from the joint network.


    • Application instructions
      • Do not use on areas directly exposed to sunlight or on heated surfaces.

        Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.

        When using with heated flooring, a closed layer of mortar 2 mm thick must be created beneath the floor covering in order to ensure correct functioning.

        When laying on existing, tightly adhering old surface coverings, apply a scratch coat before laying the new covering.

        On newly laid screed, the readiness for covering must be determined according to the CM method.

        * Natural fillers lead to slight deviations in the amount of water required. The optimum water quantity depends on the building site conditions and the layer thickness.

    • Working tools / cleaning
      • Mortar cover / Filling knife / Trowel application
      • Mixing tool, smoothing trowel, trowel, notched trowel

        Clean tools with water while the material is still fresh.

    • Storage / shelf life
      • Protect form moisture
      • Shelf-life 9 months
      • If stored dry in closed containers, the product will keep for approximately 9 months.

    • Usage
      • Approx. 1.15 kg/m²/mm layer thickness
        4 mm tooth: approx. 2.3 kg/m²
        8 mm tooth: approx. 4.6 kg/m²

    • General information
      • Low chromate content in accordance with Directive 2003/53/EC.

        The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity.

        The mixing water must be of drinking water quality.

        Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products