Article No. 326002
Dispersion-based 1K-filler
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Repair work
- Preparation of painting works on wood, wooden materials and mineral Substrates.
- For filling porous substrates and voids.
- For use by professionals
Properties
- Quick drying at low shrinkage
- Easy to sand
- Good filling performance
- Solvent-free and environmentally friendly
-
Application
-
Application requirements
Temperature of material, surroundings and substrate: ≥ + 5 °C
-
Clean voids and fill in the product with light pressure with a Japan spatula.
Refill larger voids after a drying time of approx. 3 hours.
Maximum layer thickness is 3 mm per application.
-
Application instructions
-
To be used outdoors only with the correspondent resistant coating.
Test unknown coating systems for incompatibility.
Not suitable for areas which are prone to corrosion.
-
Drying
Drying time: approx. 30 minutes
Can be sanded/coated: after approx. 3 hoursLow temperatures, poor ventilation and high humidity delay drying.
-
-
Working tools / cleaning
-
Japan spatula made of hard plastic or stainless steel
-
GR_J1_1
Cleaning with water directly after use or with Aqua RK-898-Cleaning Concentrate for persistent contamination.
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
Usage
-
As required
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-