• Reinforcement Fabric 2.5/100 and 2.5/25

    Article No. 417701

    Reinforcement Fabric 2.5/100 and 2.5/25

    Reinforcement fabric made of E-glass with polymer plastic sheathing

    Size / Quantity

    Note: This container size is being phased out and is only available to a limited extent.

    Brochures and Catalogues


    Product specifications

    Surface weight 55 g/m²
    Warp tear strength 330 N/5 cm
    Warp stretch ≤ 3.0%
    Weft tear strength 600 N/5 cm
    Weft stretch ≤ 3.5%

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • Reinforcement in Remmers PMBCs


    • Rot-proof
    • Alkali-resistant
    • Application
      • Application requirements

        Temperature of the material, air and substrate: from min. -10 °C to max. +50 °C.

      • Push the fabric into the coating mass over its entire area.

        Overlapping zone ≥ 10 cm lengthwise and crosswise.

    • Storage / shelf life
      • Shelf-life 24 months
      • Store upright in original container in a dry place.

    • Usage
      • Total application rate approx. 1.1 m² / m²
      • Approx. 1.1 m/m Reinforcement Fabric 2.5/25
        Approx. 1.1 m²/m² Reinforcement Fabric 2.5/100

    • General information
      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • The product must be disposed of in accordance with the official regulations.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.