• Reinforcement Fabric 2.5/100 and 2.5/25

    Article No. 417601

    Reinforcement Fabric 2.5/100 and 2.5/25

    Reinforcement fabric made of E-glass with polymer plastic sheathing

    Size / Quantity

    Note: This container size is being phased out and is only available to a limited extent.

    Brochures and Catalogues


    Product specifications

    On delivery

    Surface weight 55 g/m²
    Warp tear strength 330 N/5 cm
    Warp stretch ≤ 3.0%
    Weft tear strength 600 N/5 cm
    Weft stretch ≤ 3.5%

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • Reinforcement in Remmers PMBCs


    • Rot-proof
    • Alkali-resistant
    • Application
      • Application requirements

        Temperature of the material, air and substrate: from min. -10 °C to max. +50 °C.

      • Push the fabric into the coating mass over its entire area.

        Overlapping zone ≥ 10 cm lengthwise and crosswise.

    • Storage / shelf life
      • Shelf-life 24 months
      • Store upright in original container in a dry place.

    • Usage
      • Total application rate approx. 1.1 m² / m²
      • Approx. 1.1 m/m Reinforcement Fabric 2.5/25 Approx. 1.1 m²/m² Reinforcement Fabric 2.5/100

    • General information
      • Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • The product must be disposed of in accordance with the official regulations.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.