Article No. 643805

    Primer SV

    Deep primer with waterproofing and consolidating effect

    6438 | Primer SV
    Packaging unit

    Product specifications

    On delivery

    Appearance Clear liquid
    Density (20°C) 0.88 g/cm³
    Flash point > 42
    Carrier material Hydrocarbons containing aromatic compounds

    Once fully cured

    Once fully cured

    Alkali resistance up to pH 13

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use outdoors
    • Primer for sanding, mineral building materials and fibre-cement plates exposed to weather
    • Underneath Color LA, Color LA Fill, Color PA, Color SF and other synthetic resin bound coating systems


    • Solvent-based
    • Strengthens
    • Equalises absorption capacity
    • Alkali-resistant
    • High penetration capacity
    • Contains solvents
    • Preparation
      • Substrate requirements

        Clean, dry and free of cracks.

    • Application
      • By brush / By roller
      • Application temperature: min. 5 °C max. 25 °C
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C

      • Shake well before use.

        Apply material evenly by brush or roller.

        Do not let excess material build up on the surface.

    • Application instructions
      • Do not use tools with synthetic bristles.

    • Working tools / cleaning
      • By brush / By roller
      • Brush, surface brush, lamb's wool roller

      • After use and before prolonged interruptions of work clean tools with Thinner V 101.

    • Storage / shelf life
      • Shelf-life 12 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Total application/absorption rate 100 ml - 200 ml Total / m²
      • Approx. 0.1 - 0.2 l/m², depending on the substrate

      • Apply to a large enough trial area to determine the precise amount required.

    • General information
      • The current technical regulations must be observed.

        Deviations from applicable regulations must be agreed separately.

        Always set up a trial area/trial areas first.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.