2K Marking Paint

The substrate must be load-bearing, dimensionally stable, solid, free of loose particles, dust, oils, greases, rubber abrasion and other separating substances

Old markings must be checked for stability and compatibility. In case of doubt, it is advisable to carry out test markings. If necessary, old markings must be removed mechanically.

Clean tools immediately after use with V 103.

Take suitable protective and waste disposal measures when cleaning.

If stored in unopened original container in a cool, dry place, protected from frost, the product will keep for at least 9 months.

0.4 - 0.9 kg/m² (variable depending on the substrate)

Adhesion problems may occur on new concrete surfaces due to surface components such as fine mortar layers or concrete slurry. These must be removed using suitable methods. In addition, test markings should be applied in case of doubt.

Natural, artificial and composite stone paving are flexible substrates. No warranty is assumed in the event of cracking or spalling due to the relative movements of the paving substrates, moisture penetration and the resulting wear and tear on the markings. The visible pattern of the paving joints in the markings does not constitute a defect within the meaning of liability for defects.

A preliminary test coating is strongly recommended on synthetic resin floors.

2K Marking Paint is intended exclusively for use in private or commercial areas. The use of this product on public traffic surfaces is forbidden.

Larger product residues must be disposed of in the original packaging in accordance with the applicable regulations.
Do not pour liquid coating or residues down the drain, even when cleaning tools. Must not be disposed of with household waste. Completely empty packaging must be recycled.

Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.