Article No. 080801
DS Protect 3L
3-layer drainage system made from HDPE
Product specifications
Base
HDPE (blue) with geotextile and sliding layer
Surface weight
Approx. 840 g/m² as per EN ISO 9864
Temperature resistance
-30 °C to +80 °C
Thickness
Approx. 0.6 mm as per EN ISO 9863-1
Nub height
Approx. 9 mm
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Protective layer for waterproofing elements that come into contact with the ground in old and new buildings
- Protection layer according to DIN 18531, DIN 18533 and WTA Code of Practice 4-6
- Vertical drainage element in accordance with DIN 4095
Properties
- High compressive strength
- Very good at carrying away water
- Secure protection for settlement in excavation pits
- Filter-stable and clog-resistant
- Long-lasting durability
- Optimised for pressure-sensitive substrates
-
Storage / shelf life
-
May be stored for an unlimited period if protected from direct sunlight.
-
-
Usage
-
Approx. 1.1 m²/m²
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
Proof of suitability documents (abP certificates) for liquid-applied waterproofing materials must be observed during planning and execution.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-