Article No. 080901
3-layer protection and drainage sheeting made from recycled HDPE
Product specifications
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Protective and drainage sheeting for waterproofing existing and new buildings with ground contact
- Protection layer according to DIN 18531, DIN 18533 and WTA Code of Practice 4-6
- Drainage in accordance with DIN 4095 and EN 13252
- Protection and drainage of areas with foot and vehicle traffic and green spaces
Properties
- High compressive strength
- Very good at carrying away water
- With sliding function to protect against settlement of the excavation backfill
- Filter-stable and clog-resistant
- Long-lasting durability
- Optimised for pressure-sensitive substrates
-
Storage / shelf life
-
May be stored for an unlimited period if protected from direct sunlight.
-
-
Usage
-
Approx. 1.1 m²/m²
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
When used under areas with extensive or intensive greening, a root-resistant protective layer must be installed beneath the protective and drainage sheeting to protect the waterproofing against root penetration.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-