• Epoxy Quick Fix

    Article No. 627210

    Epoxy Quick Fix

    Fast-reacting synthetic resin mortar

    6272 | Epoxy Quick Fix
    Size / Quantity

    Product specifications

    Density (20°C) 1.08 g/cm³ (binder)
    Grain density 2.65 g/cm³ (filler)

    Once fully cured

    Flexural tensile strength > 30 N/mm² *
    Compressive strength > 80 N/mm² *

    * Mixing ratio 1 : 10 parts by weight (binder : filler)

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Hollow and triangular coves
    • For filling and repairing missing and broken out areas
    • For producing sills and transitions


    • Coordinated packaging unit including primer
    • Cures quickly
    • Cures at low temperatures
    • Easy to apply
    • Preparation
      • Substrate requirements

        The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion.

        The substrate must be protected from exposure to moisture from underneath during utilisation.

      • Preparations

        Widen and confine the crack.

        See the leaflet in the container for further instructions.

    • Application
      • Application temperature: min. 3 °C max. 25 °C
      • Smoothing trowel
      • Pot life 15 min
      • Application requirements

        Temperature of the material, air and substrate: from min. +3 °C to max. +25 °C

      • As a general principle, higher temperatures will reduce and lower temperatures will increase the times stated.

    • Working tools / cleaning
      • Smoothing trowel
      • Smoothing trowel, mixer

      • More detailed information can be found in the Remmers Tool Programme.

        Clean tools, equipment and splashed material immediately while fresh with V 101.

        Take suitable protective and waste disposal measures when cleaning.

    • Storage / shelf life
      • Store frost-free
      • Shelf-life 24 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

    • Usage
      • See application examples

    • Application examples
      • Synthetic resin mortar

        Prime the bonding surfaces. Then, while the primer is still wet, apply the mixed mortar to it, compact and smooth.

        approx. 2.0 kg/m² per mm layer thickness
        or approx. 2.0 kg/l cavity

    • General information
      • Unless otherwise specified, all of the values and application rates given above have been determined under laboratory conditions (20 °C). Slight deviations from these values may arise if the product is worked with on site.

        Epoxy resins are generally not colourfast when exposed to UV light or weather.

        Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For professional users only!

        For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet and the brochure entitled "Epoxy Resins in the Construction Industry and the Environment", issued by Deutsche Bauchemie e.V. (3rd edition 2022).

    Tools, accessories and PPE