Color SP

Dry, clean, free of dust and cracks and capable of supporting a load.

Free of salts known to be damaging to building materials.

Remove any old coatings not capable of supporting a load, making sure not to leave any residue.

Prime sanding, well adhering substrates with Primer Hydro F (art. 2842).

Temperature of material, environment and substrate: min. +5 °C up to max. +25 °C

Stir well.

Coat the surface using a suitable tool.

Depending on the conditions of the substrate, apply 1 or 2 coats.

Wait at least 8 hours between coats.

Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

When coating continuous surfaces, only use materials with the same batch number.

Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required.

Paintbrush, flat brush, lambskin roller, airless sprayer

Clean tools, equipment and any splashed material immediately with water while still fresh.

Approx. 0.13 - 0.15 l/m² per coat

Application rates may vary depending on the condition of the surface.

Apply to a large enough trial area to determine the precise amount required.

Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

The relevant test certificates must be observed when planning and carrying out work.

Always set up a trial area/trial areas first.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.