• Aqua MSV-403- Parkettgrundierung

    Article No. 236905

    Aqua MSV-403 Parquet Primer

    Special primer for parquet and wooden flooring, minimises unwanted adhesion

    Colour: clear | 2369
    Size / Quantity

    Brochures and Catalogues

    product.brochures.loading

    Product specifications

    On delivery

    Binder Acrylate
    Density (20°C) Approx. 1.03 g/cm³
    Odour Mild
    Runout time s in DIN 2 cup Approx. 55

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • for wood floors
    • For professional users only
    • Interior wood
    • Industrial parquet
    • Wooden strip flooring
    • Parquet without shear resistance
    • Wood block flooring
    • Heated floors

    Properties

    • Water-based
    • Minimises unwanted adhesion caused by material running into joints
    • Reduces the risk of joint fractures
    • Good sanding properties
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

        Wood moisture content: 8-12%

      • Preparations

        Sand wood with P 80 - 150.

    • Application
      • Shake before use
      • Application temperature: min. 18 °C max. 25 °C
      • By roller
      • Application requirements

        Temperature of the material, air and substrate: from min. +18 °C to max. +25°C.

      • Shake well before use.

        Apply with a roller.

        Intermediate and final coats of suitable products can be applied after drying.

        When allowed to dry overnight, intermediate sanding is required.

        Seal opened containers well and use contents as soon as possible.

    • Application instructions
      • Drying time: can be worked over after 1-2 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        Do not empty and disperse on the floor (material build-up).

      • Drying

        Overcoating: after approx. 1-2 hours

        Practice values at +20 °C and 65% relative humidity.

        Low temperatures, poor ventilation and high humidity delay drying.

      • Thinning

        Ready to use

    • Working tools / cleaning
      • By roller
      • Rustproof tools Sealant roller with microfibre cover, pile height approx. 8-12 mm

      • Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Store frost-free and cool / protect for moisture / close containers
      • Shelf-life 24 months
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

    • Usage
      • Approx. 100 - 120 ml / m² per layer applied
      • 100 - 120 ml/m² per coat

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.