• Epoxy Wood Substitution Compound
  • Epoxy Wood Substitution Compound
    • Epoxy Wood Substitution Compound
    • Epoxy Wood Substitution Compound

    Article No. 316203

    Epoxy Wood Substitution Compound

    Two-component, solvent-free levelling compound

    Colour: grey | 3162
    Packaging unit

    Product specifications

    On delivery

    Density (20°C) Approx. 0.93 g/cm³

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use indoors
    • For professional users only
    • Interior wood
    • Only on small sections of exterior wood
    • Reconstruction of wood components pre-treated with Epoxy Wood Strengthener
    • Preservation of historic wood elements (e.g. framework, antiquities)

    Properties

    • High compressive strength
    • Reconstructs wood components while blocking water vapour
    • Low specific weight
    • Excellent mouldability
    • Can be fully overcoated for colour matching
    • Preparation
      • Substrate requirements

        The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner.

      • Preparations

        Before applying the product, prime the damaged areas of wood that are to be repaired with Remmers Epoxy Wood Strengthener. The wood substitution compound must be applied while the previous coating is freshly applied and still tacky.

    • Application
      • Trowel
      • Application temperature: min. 10 °C max. 25 °C
      • Application requirements

        Temperature of the material, air and substrate: from min. +10 °C to max. +25°C

      • Use clean tools to apply the mixed wood substitution compound within the specified pot life, compact it thoroughly and smooth it off. To smooth the surfaces, clean tools thoroughly and wet with Thinner V 101 to prevent drips from forming.

    • Application instructions
      • Drying time: can be worked over after 24 h
      • Check colour, adhesion and compatibility with the substrate by setting up a trial area.

        If shuttering aids are used, PE film must be used as a release agent.

      • Drying

        Ready for next coat: after approx. 24 hours

    • Working tools / cleaning
      • Trowel
      • Scraper, trowel, stainless steel smoothing tool

      • Clean tools immediately after use with V 101 Thinner.

        The material can no longer be cleaned off once it has dried or hardened.

        Ensure that any residue from cleaning is disposed of correctly.

    • Storage / shelf life
      • Shelf-life 24 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.

    • Usage
      • 0.93 kg/m² per mm layer thickness; corresponds to 0.93 kg per litre volume

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.