Your search results for "United Kingdom"

  Show all filters

View:

11 Reference(s) found

Reference

Category

Description

Reference

Precision Micro, Birmingham

Birmingham

Category

Floor Coatings

Description

After extensive trials and chemical exposure testing, Remmers resin systems were selected for the works. For the ceiling, Epoxy BS3000 SG provided chemical protection to the galvanised steel surface and exhibited excellent adhesive properties after the steel was prepared using an ice blasting process. The floors were a mixture of existing resin finishes, new concrete and Polypropylene drain covers. A selection of priming solutions for the different areas were utilised including, Epoxy ST100, Epoxy MT100 and Epoxy BS3000 SG. Then topped with Epoxy Flex PH laid at 2mm and sealed with PUR Top M+. Integral coved skirting was installed to all perimeters, 100mm high.

Category

Facade Protection and Refurbishment, Monument Preservation and cleaning

Description

The first phase of the project to renovate the inner courtyards involved cleaning and repairing masonry in the courtrooms used by chancellors and government officials in the House of Lords. Special cleaning methods were required for the windows of the Royal Gallery. Temporary protection and vibration monitoring were necessary in order to eliminate any risk of damage to the wall painting “The Death of Nelson” by Irish artist Daniel Maclise, as well as ensuring that the House of Lords could continue with its sittings uninterrupted. Remmers Clean Galena was the perfect solution because it can be applied and removed by hand without the need for machinery or pressurised water.

Reference

Crossrail Station Abbey Wood, London

London SE2 9HA

Category

Wood Preservation, Fire Protection & Wood

Description

The old station building was demolished in May 2015 because it had become too small for the volume of passengers passing through. The roof of the new building is shaped like a manta ray. The laminated beams had to provide structural stability, as well as satisfying the most exacting aesthetic demands.

Reference

Head above Water, London

London

Category

Coating for Windows and Wood Elements, Wood Coatings

Description

This wooden sculpture of a human head floated above the Thames, where it was exposed to the ravages of the weather. Since it was only on display for the two-week run of the design festival, long-term wood preservation was not necessary. Moisture protection was applied, and the decision was taken to dispense with a finishing coat. In addition to the protective properties, sustainability was also vitally important.

Reference

Southbank Centre, London

London

Category

Concrete Protection and Repairs, Facade Protection and Refurbishment

Description

One part of the two-year renovation of the South Bank Centre was a large-scale concrete restoration of the exposed concrete surfaces in the interior of the world-famous art rooms. The walls and ceilings in the Queen Elizabeth Hall, Hayward Gallery and Purcell Room were restored to their original state by means of colour matching. In order to clean the surface from dirt, the room was prepared under strict observation of the room temperature and relative humidity. The film-forming peel-off paste Arte Mundit was applied in the required thickness to remove the surface impurities. This created a cleaner, brighter environment.

Reference

Westminster Hall, London

London

Category

Facade Protection and Refurbishment

Description

Some 200 years’ worth of dirt and soot had accumulated on the internal walls of Westminster Palace. The imposing natural stone walls needed to be cleaned without this causing any damage to the building. In order to ensure that all the scaffolding could be dismantled within six hours to allow important events to go ahead, the project had to be divided up into sections – but the divisions between sections needed to be completely invisible in the end result. In addition, artist Jorge Otero-Pailos planned to use a 50-metre length of the latex skin from the cleaning project in his exhibition “The Ethics of Dust”. This project required close collaboration between the renovators and the artist.

Reference

Norbar Torque Tools, Banbury

Banbury

Category

Floor Coatings

Description

The whole area of the renovation was previously covered with a magnesite screed. Although Remmers have options to top such a substrate, the decision was made to remove the Magnesite as it was showing signs of deterioration in many areas and would always have been a concern to the client. Once removed, the substrate needed a new vapour barrier and significant levelling to give an even surface for future operations. The floor was primed with 2 coats of Epoxy MT100 and levelled with Optiplan Base screed between 10- 20mm thick across the full area. This was installed in 4 consecutive days applying over 1000m2 per day. Once left to cure and dry over the weekend, a layer of Epoxy Flex PH was applied at 2mm thick and finally topped with a slip resistant coat of Epoxy BS3000 SG incoporating Aluminium Oxide.

Reference

ArcHaus and Ducati, Peterborough

PE8 6JN Peterborough, Cambridgeshire

Category

Facade Protection and Refurbishment

Description

Damage caused by salts and excessive cracking could be seen on the facade. The render was crumbling and the brickwork underneath was visible. Graffiti had been daubed all over the building.

Reference

Crossrail Station Canary Wharf, London

London E14 5AR

Category

Wood Preservation, Fire Protection & Wood, Coating for Windows and Wood Elements

Description

It was important for the 1414 laminated wooden beams to highlight the exceptional properties of wood as a building material. Meanwhile, the wood needed to be protected from wood-destroying insects and fungi. The wood preservation measures used also offer protection against wind, weather and UV radiation.

Reference

BASF, Little Island

Cork

Category

Building Waterpoofing and Refurbishment

Description

The joints in the concrete sections are subject to continuous movement and so a waterproof and crack bridging system was required. Over 100m of Remmers Flexible bandage B200 was fixed using Epoxy MT 100. The system was over coated in part with Remmers MB 2K.