Your search results for "IR PUR 2K 75"

  Show all filters

View:

26 Reference(s) found

Reference

Category

Description

Category

Building Waterpoofing and Refurbishment, Facade Protection and Refurbishment, Coating for Windows and Wood Elements

Description

The buildings of "New Holland" have been restored several times over the years and have been repeatedly supplemented with new buildings and extensions. All buildings were damaged inside as well as on the facade and roof. The brick facades in particular, which were heavily soaked through, posed a major problem. In addition, damage to the masonry and the cladding of the plinths was detected. During the restoration of the brick masonry, the varying condition as well as the heterogeneous nature proved to be a particular challenge. There was also high salt content, which could be damaging to the building and therefore had to be reduced. Finally, the aim was to achieve the most harmonious possible colour matching of the stone surfaces.

Reference

Precision Micro, Birmingham

Birmingham

Category

Floor Coatings

Description

After extensive trials and chemical exposure testing, Remmers resin systems were selected for the works. For the ceiling, Epoxy BS3000 SG provided chemical protection to the galvanised steel surface and exhibited excellent adhesive properties after the steel was prepared using an ice blasting process. The floors were a mixture of existing resin finishes, new concrete and Polypropylene drain covers. A selection of priming solutions for the different areas were utilised including, Epoxy ST100, Epoxy MT100 and Epoxy BS3000 SG. Then topped with Epoxy Flex PH laid at 2mm and sealed with PUR Top M+. Integral coved skirting was installed to all perimeters, 100mm high.

Category

Concrete Protection and Repairs, Building Waterpoofing and Refurbishment

Description

The pool is permanently exposed to positive and negative water pollution. It was therefore important that an expansion zone remains in the middle of the joint seal, which allows the structure to work and provides an optimal surface. The joints should still be reliably sealed. Both the crack repair and the concrete repair were carried out in accordance with the classic procedure in accordance with the repair guidelines, in which cracks are closed by injecting epoxy or polyurethane resin using a drill packer. The concrete surfaces in particular had to be protected against chemical attack, especially against the high ammonium pollution from the connected meat industry.

Category

Facade Protection and Refurbishment, Building Waterpoofing and Refurbishment, Concrete Protection and Repairs

Description

The lake itself had been drained since 2014 but had significant cracking and deterioration on the slab joints. In order to have a succesful restoration, the lake needed to become watertight again. The solution was available using Remmers MB2K waterproofing in conjunction with Waterstop B240 banding. WHY? The existing joint filler material within the lake was bituminous in nature. MB2K adheres excellently to both new and old bitumen coatings, without the need to abrade or mechanically prepare them, a critical advantage in this instance. Removal or the existing damaged fillers would have been a time consuming and costly excercise. Having waterproofed the lake bed and walls, extensive restoration then took place on the stone staircases and planters around the site. Colour matched restoration mortars and Funcosil hydrophobic treatments were used extensively.

Reference

Southbank Centre, London

London

Category

Concrete Protection and Repairs, Facade Protection and Refurbishment

Description

One part of the two-year renovation of the South Bank Centre was a large-scale concrete restoration of the exposed concrete surfaces in the interior of the world-famous art rooms. The walls and ceilings in the Queen Elizabeth Hall, Hayward Gallery and Purcell Room were restored to their original state by means of colour matching. In order to clean the surface from dirt, the room was prepared under strict observation of the room temperature and relative humidity. The film-forming peel-off paste Arte Mundit was applied in the required thickness to remove the surface impurities. This created a cleaner, brighter environment.

Category

Floor Coatings

Description

There were many criteria that had to to be met as the same flooring spec was to be used throughout multiple individual areas of the new building. In the gallery on the ground floor, special attention was paid to the UV stability of the floor coating due to the many floor-to-ceiling windows. The topic of "footfall noise reduction and noise level" was also important. This is why the decision was made to use a seamless PU coating, which, unlike mineral coverings, is not rock-hard, but rather elastic which offers a comfortable walking floor. Another positive effect for residents, guests and staff is the better acoustics. The floor does not reflect the sound as strongly as a tiled floor. This means that the acoustics in the rooms are pleasant.

Category

Floor Coatings

Description

In order to represent the theme of the Varus Battle and the architectural Germanic style, an important requirement for the floor covering was a rustic look with good slip resistance and high durability. Easy cleaning also played a major role in a public wellness facility.

Category

Floor Coatings

Description

In order to facilitate orientation around the store, a coloured customer guidance system was to be installed on a floor area of over 1,800 m² to the respective product displays. With the colour-contrasting "lane", individual departments in the supermarket were highlighted to help guide the customer through the market. This also allowed the shopping trolleys to glide much more quietly than they would over tiled floor.

Reference

C&D Foods, Longford

Longford

Category

Floor Coatings

Description

Remmers Crete SL was applied in combination with Remmers PUR Color Top 2KM seal coat to provide a colour stable finish and a subsequent seal coat of Remmers PUR Aqua Top 2KM SG, with the inclusion of a polymer bead to provide an R11 level of slip resistance with a silk gloss floor finish. The system was installed by specialist flooring contractor Larsen Contracts who worked closely with the main contractor, Gem Construction to allow the installation of the floor whilst other fitting out activities were also being carried out, optimising the overall program.This carefully designed system is ideally suited to areas subjected to medium to heavy duty use for industrial floors within food processing facilities.

Category

Description

In the course of the regular test inspection in accordance with DIN 1076, the chloride concentration and the carbonation depth of the structural concrete was determined using a mobile bridge inspection device on an area of approx. 12,000m², in addition to the tests prescribed by the standard. Furthermore a random measurement of the concrete cover as well as an endoscopy of the tendon cladding tubes were carried out via the ventilation tubes. The result: urgent need for renovation.

Category

Facade Protection and Refurbishment, Building Waterpoofing and Refurbishment

Description

The restoration of the building, which is over one hundred years old, was a complex task. The facade first had to be cleaned with special product due to the high degree of contamination with heavy efflorescence and sintering, The damaged joints were then repaired. The white natural stone elements of the façade were desalinated with compresses and then re-profiled and supplemented. This was followed by stone consolidation and hydrophobing. A mineral sealing was applied in the base area, which was finished with a new layer of plaster. Therefore protecting the building from further moisture ingress.

Reference

Logistics Hall, Aschaffenburg, Germany

Aschaffenburg

Category

Floor Coatings

Description

The asphalt walkways showed great damage due to decades of stress. Numerous penetrations, caused by heavy shelving fixtures and broken wall panels, led to incorrect positions The flooring was also cracked in large areas and had defective joints.

Category

Floor Coatings

Description

The floor in the Ratiopharm-Arena was designed with a coloured PU-coating with a flake scattering. Despite the transparent sealing, UV stability had to be guaranteed. As there is room for up to 9000 people in the arena, the floor is exposed to high mechanical stress. This is also the reason for the non-slip surface which must be present to ensure the safety of the visitors.

Reference

Mortuary Temple of Hatshepsut, Egypt

New Valley Governorate

Category

Facade Protection and Refurbishment

Description

The fragments of the building showed different weathering and strength profiles due to the long period of weathering. These had to be compensated by different stone strengtheners. In addition, the chemical processes within the limestone were blocked, thereby preventing future absorption of water and dirt. The leveling of the fragments was also an important point in order to achieve a uniform appearance. Shattered relief blocks had to be glued together. Some of the limestone showed pronounced swelling and shrinking due to swellable clay minerals. This process had to be stopped. As there were no completely preserved Sphinx figures within the structure of the building, during the restoration process up to six complete figures were reconstructed from the many fragments.

Category

Floor Coatings

Description

An anti-slip coating suitable for heavy duty use, exposure to oil contamination and frequent high pressure cleaning was required. Samples of Remmers systems were applied for client assessment prior to application. The surface was prepared by vacuum shot blasting the area prior to the application of Remmers Epoxy FAS 100. Remmers Epoxy Flex PH, incorporating a quartz profile was chosen as a final coating.