• Selectmix SBL

    Article No. 674710

    Selectmix SBL

    Filler mixture with a special aggregate grading curve

    6747 | Selectmix SBL
    Packaging unit

    Product specifications

    On delivery

    Form Solid
    Particle size up to 0.3 mm
    Grain density 2.65 g/cm³

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • Special filler for suitable Remmers epoxy resin systems


    • High degree of filling possible even at low layer thicknesses
    • Application
      • Use, degree of filling and working directions are determined by the specific application and the resin/hardener system used.

    • Storage / shelf life
      • Protect form moisture
      • Unlimited if stored dry.

    • Usage
      • Dependent on application (see Technical Data Sheet for the applicable binder)

    • General information
      • The max. degree of filling depends on the binder used, the layer thickness and the conditions on the construction site.

        Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.

    • Safety / regulations
      • For professional users only!

        Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.