Article No. 069384
Active special cleaner for removing biological coatings
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C
Spray directly onto the material at a distance of approx. 15 cm.
After 30 minutes, wipe the surface with a damp cloth.
If needed, repeat the application.
Test on an inconspicuous area before use to ensure compatibility.
Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.
If the material comes into contact with metal, wash away immediately with water.
Store in well-sealed, original containers, out of the reach of children and in a dry, cool, well-ventilated room which is protected from direct sunlight and frost. No smoking is permitted in storage areas.
Approx. 100 ml/m² depending on the level of infestation
The applicable regulations and legal requirements must be observed.
Do not mix with other cleaning products.
Use only in well-ventilated areas.
Dispose of contents/container in accordance with local/regional/national/international regulations.
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.