• 0000023713_iQ-Paint
  • 0000023705_iQ-Paint
    • 0000023713_iQ-Paint
    • 0000023705_iQ-Paint

    Article No. 023505

    iQ-Paint

    Colour: iQ-Paint | 0235
    Colour: iQ-Paint | 0235
    Please choose a colour
    Packaging unit

    Product specifications

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on walls indoors and ceilings
    • AW_iQ_21
    • Mineral substrates

    Properties

    • Water-based
    • Capillary-active
    • Highly permeable to water vapour
    • EG_iQ_9
    • Free from solvents and plasticizers
    • Low emissions
    • Wet abrasion resistance class 3 according to DIN EN 13300
    • EG_iQ_10
    • Degree of gloss: dull matt
    • Preparation
      • Substrate requirements

        Dry, clean, free of dust and cracks (except hairline cracks) and capable of supporting a load.

      • Preparations

        U2_iQ_3

    • Application
      • By brush / By roller / Airless/airmix spraying
      • Application temperature: min. 5 °C max. 25 °C
      • Stir well.

        Coat the surface using a suitable tool.

        Apply the material in 2 coats, depending on the condition of the substrate.

        Wait at least 8 hours between coats.

    • Application instructions
      • Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        When coating continuous surfaces, only use materials with the same batch number.

        Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required.

        For the first coat, the material can be diluted with up to 10% water.

    • Working tools / cleaning
      • By brush / By roller / Airless/airmix spraying
      • Clean tools, equipment and any splashed material immediately with water while still fresh.

    • Storage / shelf life
      • Shelf-life 12 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 150 ml / m² per layer applied
      • The application rate depends on the absorbency of the surface

        Apply to a large enough trial area to determine the precise amount required.

    • General information
      • Deviations from applicable regulations must be agreed separately.

        Always set up a trial area/trial areas first.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.