• Tex 4.8/100 and Tex 4.8/25
  • Tex 4.8/100 and Tex 4.8/25
    • Tex 4.8/100 and Tex 4.8/25
    • Tex 4.8/100 and Tex 4.8/25

    Article No. 418401

    Tex 4.8/100 and Tex 4.8/25

    Reinforcement fabric made of E-glass with polymer plastic sheathing

    Variant
    Size / Quantity

    Note: This container size is being phased out and is only available to a limited extent.

    Brochures and Catalogues

    product.brochures.loading

    Product specifications

    On delivery

    Mesh size 4.8 x 5.1 mm
    Surface weight min. 75 g/m²
    Warp tear strength 1000 N/cm
    Weft tear strength 950 N/ cm

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • Reinforcement in Remmers PMBCs

    Properties

    • Rot-proof
    • Alkali-resistant
    • Application
      • Application requirements

        Temperature of the material, air and substrate: from min. -10 °C to max. +50 °C

      • Push the fabric into the coating mass over its entire area.

        Overlapping zone ≥ 10 cm lengthwise and crosswise.

    • Storage / shelf life
      • Shelf-life 24 months
      • Store upright in original container in a dry place.

    • Usage
      • Total application rate approx. 1.1 m² / m²
      • Approx. 1.1 m/m Tex 4.8/25, Approx. 1.1 m²/m² Tex 4.8/100

    • General information
      • Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • The product must be disposed of in accordance with the official regulations.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Tools, accessories and PPE