Article No. 285025

    Marble Cement

    White natural stone and tile cement

    Button Geprüft nach C2 TE - hoch standfest lange klebeoffen
    Colour: antique white | 2850
    Packaging unit

    Product specifications

    On delivery

    Foot traffic/ready for use Approx. 3 hours
    Load Approx. 24 hours
    Cement bed thickness Up to max. 15 mm
    Open time Up to 20 minutes (depending on temperature)
    Bulk density Approx. 1.2 kg/dm³
    Water requirement 25% corresponds to 6.25 l / 25 kg

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls/ceilings indoors and outdoors
    • Laying ceramic wall and floor coverings
    • Bonding wall and floor coverings made of natural stone
    • Bonding glass mosaic and glass bricks
    • For interior and exterior use
    • Dry, wet and underwater environments
    • Waterproofing in a bond
    • Levelling of substrates with unevenness up to 5 mm
    • Substrates with increased deformation behaviour

    Properties

    • White binder
    • Rapid water binding
    • High adhesive pull strength (C 2)
    • High slip resistance (T) and bond strength
    • Extended open time (E)
    • Preparation
      • Substrate requirements

        Clean, dust-free and capable of supporting a load.

      • Preparations

        Remove projecting seams and mortar remains.

        Level the substrate.

        Pretreat highly absorbent substrates with Primer Hydro F (Art. 2842).

    • Application
      • Mortar cover / Filling knife / Trowel application
      • Application temperature: min. 5 °C max. 30 °C
      • Application requirements

        Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C

      • To increase the adhesive pull strength, apply a scratch coat (contact layer) first.

        Apply the product directly using a suitable toothed trowel.

        Lay the surface covering on the wet mortar bed, pushing down gently.

        Remove wet mortar residue from the top of the surface covering promptly.

        Remove excess mortar from the joint network.

    • Application instructions
      • Do not use on areas directly exposed to sunlight or on heated surfaces.

        Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.

        When using with heated flooring, a closed layer of mortar 2 mm thick must be created beneath the floor covering in order to ensure correct functioning.

        When laying on existing, tightly adhering old surface coverings, apply a scratch coat before laying the new covering.

    • Working tools / cleaning
      • Mortar cover / Filling knife / Trowel application
      • Mixer, trowel, notched trowel, smoothing trowel

      • Clean tools with water while the material is still fresh.

    • Storage / shelf life
      • Protect form moisture
      • Shelf-life 12 months
      • If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.

    • Usage
      • Approx. 1.25 kg / mm thick layer / m²
      • Approx. 1.25 kg/m²/mm layer thickness 4 mm tooth: approx. 2.5 kg/m² 8 mm tooth: approx. 5.0 kg/m²

    • General information
      • Low chromate content in accordance with Directive 2003/53/EC.

        The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity.

        The mixing water must be of drinking water quality.

        Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products