Ilack C

The substrate must be clean, solid and free of oils, grease and release agents.

Matt damp surfaces are permitted.

Ready to use, straight from the container.

Blind with quartz sand if necessary.

In the case of liquid-applied waterproofing materials, direct sunlight and/or wind exposure can cause accelerated skin formation and accompanying blistering.

Do not use in enclosed spaces.

Do not apply any further sealing layers until the previous layer has hardened sufficiently.

Seal opened containers well and use contents as soon as possible.

Flat brush, lambskin roller FC, suitable spraying equipment

Clean tools immediately after use with water.

Remove dried-on material using V 101 Thinner (0978).

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

At least 0.20 l/m² per coat

Application rate increases accordingly on rough surfaces.

Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

The relevant test certificates must be observed when planning and carrying out work.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

Do not eat, drink or smoke when working.