Article No. 040925
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Clean, dust-free and capable of supporting a load.
Pre-wet the substrate.
Pre-wet hydrophobic substrates with low surface tension water.
Pretreat highly absorbent substrates with Primer Hydro F (Art. 2842).
Using a suitable tool, apply the product as a contact layer.
Apply product in the desired coating thickness.
Smooth the surface using a suitable tool.
Carry out subsequent surface treatment after material has stiffened.
Can be sanded once set.
Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar.
Protect wet mortar surfaces against frost, rain and drying out too quickly for at least 4 days.
Hairline/shrinkage cracks are safe and are not cause for complaint as they do not impair the properties of the mortar.
Clean tools and equipment with water before the mortar sets.
If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.
Apply to a large enough trial area to determine the precise amount required.
May contain traces of pyrite (iron sulphide).
Low chromate content in accordance with Directive 2003/53/EC.
The mixing water must be of drinking water quality.
Always set up a trial area/trial areas first.
The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity.
Deviations from applicable regulations must be agreed separately.
The relevant test certificates must be observed when planning and carrying out work.
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.