• 0000293013_Color_Sil_basic
  • 0000293105_Color_PA_Roof
    • 0000293013_Color_Sil_basic
    • 0000293105_Color_PA_Roof

    Article No. 293005

    Fassadenfarbe

    Colour: Fassadenfarbe | 2930
    Colour: Fassadenfarbe | 2930
    Please choose a colour
    Packaging unit

    Product specifications

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use outdoors
    • Porous, mineral building materials in outdoor areas
    • AW_I_44
    • Load-bearing silicate, silicone and matt dispersion coatings
    • Synthetic resin renders

    Properties

    • Water-based
    • Water repellent w ≤ 0.1 kg/(m² h ∙ 0.5)
    • EG_I_34
    • Low-stress
    • Matt, mineral character
    • Preparation
      • Substrate requirements

        Dry, clean, free of dust and cracks and capable of supporting a load.

        Free of salts known to be damaging to building materials.

      • Preparations

        Use Impregnation Primer to prime mineral substrates capable of supporting a load.

        Use Primer SV or Hydro Deep Primer to prime any sanding, firmly adhering substrates.

    • Application
      • By brush/By roller/Flow cup gun
      • Application temperature: min. 5 °C max. 25 °C
      • Stir well.

        Coat the surface using a suitable tool.

        Apply the material in 2 coats, depending on the condition of the substrate.

        Wait at least 6 hours between coats.

    • Application instructions
      • Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        When coating continuous surfaces, only use materials with the same batch number.

        Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required.

        Protect freshly treated surfaces from driving rain, wind, sunlight and condensation.

    • Working tools / cleaning
      • By brush / By roller / Airless/airmix spraying
      • Clean tools, equipment and any splashed material immediately with water while still fresh.

    • Storage / shelf life
      • Shelf-life 12 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • 200-300 ml per layer applied / m²
      • 2 coats required.

        Application rates may vary depending on the condition of the surface.

        Apply to a large enough trial area to determine the precise amount required.

    • General information
      • Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

        Always set up a trial area/trial areas first.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.