Article No. 764105

    AW Pouring Compound 2K

    Self-levelling, 2-component joint sealing compound on a synthetic resin/polyurethane base

    Colour: black | 7641
    Packaging unit

    Product specifications

    On delivery

    Density (20°C) 1.3 g/ml
    Colour black
    Mixing ratio 92.5 : 7.5
    Pot life Approx. 90 min.

    Once fully cured

    Once fully cured

    Elastic recovery
    (DIN EN ISO 7389)
    > 90%
    Volume loss
    (DIN EN ISO 10563)
    -3%

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors indoors and outdoors
    • Elastic filling of floor joints in paved areas and on screeds in parking garages, underground garages, factory halls, walkways and terraces

    Properties

    • Resistant to water, sewage, salt water, weak acids, lyes, oils and most solvents
    • EG_PU_8
    • EG_PU_9
    • Preparation
      • Substrate requirements

        The sides of the joints must be load-bearing, dry, clean and free of grease, metals must be bare.

      • Preparations

        VA1_PU_1

        U2_S_16

    • Preparation
      • Mixing ratio comp. A 92.5 : comp. B 7.5
      • Mixing time 3 min
      • Combination container

        Add the entire quantity of the hardener (component B) to the basic compound (component A).

        Mix thoroughly with a slow-speed electric mixer
        (approx. 300 - 400 rpm).

        Mix for at least 3 minutes.

        Insufficient mixing is indicated by streaks forming.

    • Application
      • Pot life approx. 90 min
      • Application temperature: min. 10 °C max. 35 °C
      • Application requirements

        Temperature of the material, air and substrate: from min. +10 °C to max. +35 °C

      • VA1_PU_2

    • Application instructions
      • VA2_PU_1

        H_B_179

        VA2_PU_2

    • Working tools / cleaning
      • Clean tools while fresh with V 101. After setting, the material can only be removed by mechanical means. If necessary, swell first with V 101.

    • Storage / shelf life
      • Shelf-life 12 months
      • Store frost-free and cool / protect for moisture / close containers
      • If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

    • Usage
      • Approx. 130 g/running metre for a 1 cm² joint cross-section

    • General information
      • Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

        Always set up a trial area/trial areas first.

        H_PU_1

        H_PU_2

        Deviations from applicable regulations must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    • Disposal instructions
      • Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

    • Safety / regulations
      • For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.

    Possible system products