• Tex 4/100

    Article No. 388001

    Tex 4/100

    E-glass reinforcement fabric covered with polymeric plastics

    Variant
    3880 | Tex 4/100
    Size / Quantity

    Brochures and Catalogues

    product.brochures.loading

    Product specifications

    Mesh size 4 x 4 mm
    Surface weight Approx. 160 g/m²
    Warp tear strength Min. 2000 N
    Weft tear strength Min. 2000 N

    The stated values represent typical product characteristics and are not to be construed as binding product specifications.

    Field of application

    • For use on floors/walls indoors and outdoors
    • Absorption of movements of the substrate
    • Crack repair
    • Composite thermal insulation systems
    • Reinforcement of the iQ Top SLS and Power Protect [eco] systems

    Properties

    • Permanently elastic
    • Rot-proof
    • Alkali-resistant
    • Non-slip
    • W: 1 m / L: 50 m
    • Application
      • Stapling

        Staple the fabric on the sanded, vacuumed wood planks after priming the substrate and allowing to dry. Staple approx. 6 times per m².

        Overlapping zone ≥ 10 cm lengthwise and crosswise.

         

        Adhesive bonding

        Push the fabric into the coating mass over its entire area.

        Overlapping zone ≥ 10 cm lengthwise and crosswise.

    • Storage / shelf life
      • Protect form moisture
      • Shelf-life 24 months
      • Store upright in original container in a dry place.

    • Usage
      • Total application rate approx. 1.1 m² / m²
      • Approx. 1.1 m²/m²

    • General information
      • Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

        The relevant test certificates must be observed when planning and carrying out work.

    Possible system products